3Com 3C16491 manual Gigabit Combo Ports RJ-45/SFP

Page 11

téléphonique central privé ou public. Raccorder seulement connecteurs de données RJ-45, systèmes de réseaux de téléphonie ou téléphones de réseaux à ces prises.

Il est possible de raccorder des câbles protégés ou non protégés avec des jacks protégés ou non protégés à ces prises de données.

WARNHINWEIS: RJ-45-Porte. Diese Porte sind geschützte Datensteckdosen. Sie dürfen weder wie normale traditionelle Telefonsteckdosen noch für die Verbindung der Einheit mit einem traditionellem privatem oder öffentlichem Telefonnetzwerk gebraucht werden. Nur RJ-45-Datenanscluße, Telefonnetzsysteme or Netztelefone an diese Steckdosen anschließen. Entweder geschützte oder ungeschützte Buchsen dürfen an diese Datensteckdosen angeschlossen werden.

The Switch has 24 10/100 Mbps auto-negotiating ports. Each port supports automatic MDI/MDI-X detection and can be connected to either a 10BASE-T, or 100BASE-TX device.

For each port, the speed and duplex mode (half duplex or full duplex for 10BASE-T and 100BASE-TX) are automatically determined by the capabilities of the connected device.

The Switch also support IEEE 802.3af-2003 standard (802.3af) Power-over-Ethernet capabilities. Each port can detect connected 802.3af-compliant network devices,

Physical Features

11

such as IP phones or wireless access points, and automatically supply the required DC power.

(2) Gigabit Combo Ports (RJ-45/SFP)

The Gigabit combo ports (RJ-45/Small Form Factor Pluggable (SFP) ports) are numbered 25 and 26. If the link connections on the SFP ports are active, the associated RJ-45 port of the same number is disabled.

The two SFP ports support fiber Gigabit Ethernet short-wave (SX) and long-wave (LX) SFP transceivers in any combination. This offers you the flexibility of using SFP transceivers to provide connectivity between the Switch and remote 1000 Mbps workgroups or to create

ahigh-capacity aggregated link backbone connection. The default active port is the SFP port. The selection of active ports can be configured via the Web interface.

The SFP port supports full duplex mode only.

SFP ports are numbered 25 and 26 on the Switch. When an SFP port is active it has priority over the 10/100/1000 port of the same number. The corresponding 10/100/1000 port is disabled when an SFP link connection is active.

Image 11

Contents 3C16491 Baseline Switch PWR Plus3Com Corporation 350 Campus Drive Marlborough MA USA Contents Snmp Regulatory Notices Glossary Index Page Conventions About this GuideProduct Registration Documentation CommentsAutonegotiating 10/100 Mbps Ports Overview of the Baseline SwitchFeatures and Capabilities Autosensing of MDI/MDIX ConnectionsFront Panel Physical FeaturesPower-over-Ethernet Capability Gigabit Combo Ports RJ-45/SFPGigabit Combo Ports RJ-45/SFP Link/Activity Status LEDs Rear Panel Power LEDPackage Contents Before You Begin Positioning the SwitchRack-Mounting or Free-Standing Using the Mounting KitPlacing Units On Top of Each Other Montagesatz AnweisungenChecking for Correct Operation Supplying Power to the SwitchInserting an SFP Transceiver Using SFP TranceiversApproved SFP Transceivers Inserting an SFP Transceiver Removing an SFP TransceiverPerforming Spot Checks Installing the Switch Running the Discovery Application Requirements for Accessing the Web InterfaceWelcome screen of Discovery appears Discovered Devices Screen Logging On to the Web InterfaceMenu Navigating the Web InterfaceLists the available items on the menu Menu Item Port Status ButtonsManually Assigned Static IP Address Accessing the Interface Without Using DiscoveryDhcp Assigned IP Address Device Summary Information Configuration OverviewPolling Interval Device ViewColor Key Administration SettingsModifying the IP Address Settings Automatic IP ConfigurationTo set the IP address for the Switch IP SetupRestore Configuration Backup ConfigurationUpgrade Screen Firmware UpgradeInitialize RebootUser Summary System AccessModify User Create UserRemove User System TimeSnmp Add SetupSummary Snmp Remove Configuring VLANsVlan Modify Port Modify VlanModify Port Screen RenameVlan Detail RemovePort Detail Forwarding Tagged/Untagged Frames Sample Vlan ConfigurationsSetting Up Vlan Across Two Switches Setting Up Two VLANs on the Same SwitchSpanning Tree Tagged Vlan ConfigurationSpanning Tree Screen Broadcast Storm Igmp SnoopingIgmp Query PoE Broadcast Storm Setup ScreenAdministration Configuring Port SettingsDetail Port Administration Summary ScreenSpeed/Duplex for 1000 Mbps Connections Port Administration Setup ScreenGuidelines for Creating Trunks Link AggregationLink Aggregation Summary Screen CreateLink Aggregation Modify Screen ModifySpanning Tree per Port Spanning Tree Summary Screen Port Mirroring Spanning Tree Setup ScreenStatistics Port Mirroring Setup ScreenQoS VoIP Summary Screen QoS VoIP Traffic SettingsQoS VoIP Setup Screen Port SetupOUI Add OUI SummaryRadius Client SecurityRadius Client Detail Screen Configure802.1X Summary Screen 802.1X Settings802.1X Detail Screen Address Table MonitoringAddress Table Screen Cable DiagnosticsCable Diagnostic Screen DiagnosticsResetting to Factory Defaults TroubleshootingForgotten Static IP Address Forgotten PasswordSolving LED Issues Link/Activity LED is on, but network performance is poor Fiber cable is connected, but the Module Active LED is offAll ports appear to show continual activity If the Problem PersistsRegister Your Product Purchase Value-Added ServicesTroubleshoot Online Access Software Downloads Contact Us Telephone Technical Support and RepairCountry Telephone Number Latsupportanc@3com.com Electrical Related StandardsEnvironmental PhysicalAppendix B Technical Information Important Safety Information Safety InformationAppendix C Safety Information Regulatory Notices Page Bandwidth 1000BASE-TAuto-negotiation Category 6 Cables Category 3 CablesCategory 5 Cables Category 5e CablesIeee 802.1Q Full DuplexHalf Duplex Ieee 802.1DNetwork LayerLink Aggregation MAC AddressSubnet Mask SwitchServer Subnet AddressVlan Numbers IndexIndex