Talk electronic VOIP-RF-900 installation instructions VI. LED Display Legend, Red

VOIP-RF-900 Installation Instructions

VI. LED Display Legend

The “master” radio has an array of LEDs that provide various status indicators. Table 2 provides a legend or key for these various indicators. In order to gain access to the LED array, you will need to open the NEMA box cover on the “master” radio.

	Table 2. VOIP-RF-900 LED Display Legend.
Name	Function	Color
Power	Unit has power and has successfully booted	RED
RF Link	The radio has successfully synchronized with its	GREEN
	matched partner radio
RF TX	Radio transmission is occurring	GREEN
RF RX	Radio reception is occurring	GREEN
Eth Link	The Ethernet port has a valid Ethernet connection	GREEN
Activity	The VOIP-RF-900 is processing data	GREEN
1 (channel)	Adding the numbers that are lit will determine the	GREEN
	current radio channel.
2 (channel)	1 = 903.12500 MHz
4 (channel)	2 = 905.20833 MHz
	3 = 907.29167 MHz
	4 = 909.37500 MHz
8 (channel)
	5 = 911.45833 MHz
	6 = 913.54167 MHz
	7 = 915.62500 MHz
	8 = 917.70833 MHz
	9 = 919.79167 MHz
	10 = 921.87500 MHz
	11 = 923.95833 MHz
	12 = 926.04167 Mhz
Link Quality Meter (the more	Excellent link quality – no retransmissions	GREEN
LEDs that are lit, the higher
	Very good link quality – few retransmissions	GREEN
the link quality)
	Good link quality – occasional retransmissions	YELLOW
	Fair link quality – some retransmissions	YELLOW
	Poor link quality – many retransmissions	RED
	No link quality – no link available	RED