3Com manual Installing the NJ240FX Intellijack

8CHAPTER 1: INSTALLING THE NJ240FX INTELLIJACK

13Align the main housing mounting hole with the metal mounting boss on the metal mounting plate and secure with the supplied long oval head machine screw.

NOTE: An access hole is provided for installations that require the supplied AC power cord to be routed back into the NEMA box. Place the AC power cord between the metal and plastic housing cable tray and route through the lower rectangular opening in the metal mounting plate. Adjust cable for desired loop length before securing in place.

Connecting Devices to Once the power source and the data source have been verified in good working

the NJ240FXorder and the IntelliJack has been installed and mounted, connect your networking devices (such as computers, printers, IP phones, cameras, etc.) to the IntelliJack.

The IntelliJack has two ways to connect devices:

1RJ-45 Personal Area Network (PAN) Ports — any of the four switched ports on the bottom of the IntelliJack. All ports feature 10/100 Mbps auto-negotiation, which configures the NJ240FX IntelliJack for 10 Mbps or 100 Mbps connections automatically.

2Pass-through port—a single pass-through port is provided that allows an additional device to be connected to a separate network segment through the same IntelliJack. The data or voice traffic that travels through the pass-through port, passes through the IntelliJack without being switched.