| Changing Device Configuration 49 |
Global Setting | Default Value |
ATU Table | Blank |
VTU Table | Blank |
All RADIUS settings | Blank |
802.1X Supplicant Status | Disabled |
802.1X Supplicant User Name and | Blank |
Password |
|
Port Setting | Default Value |
State | Forwarding |
Link | Auto negotiation |
Flow Control | Off |
MDI[X] | Force MDI |
Multicast Limit | 3% |
Priority Lookup | Tag & IPV4 |
Port Priority | 0 or 1 |
VLAN ID | 1 |
802.1Q VLAN Mode | Disable VLANs |
Data Rate Limit | All frames |
Maximum Data Rate | No limit |
The values that remain unchanged when you click Restore Base Configuration are:
•Group Name
•Location Name
•Password
•IP Address
•DHCP Settings
•SNMP Get, Set, and Trap Community Strings
•SNMP Trap Destination IP Address
•Subnet Mask
•Gateway
•Device Log (stored in EEPROM)
•Management Port VID