Rosewill RXS-3211 user manual Utilities, During Upgrade

Wired Internet Camera RXS-3211 User Manual

time setting.

Click “Apply” to save settings and make the new settings take effect.

3.7.3 Utilities

This menu allows you to upgrade firmware, clear all settings, reboot the camera, and switch LED lights on/off.

Item	Description
Upgrade	If you downloaded latest firmware file from our
Firmware	website, you can click “Browse” button to pick the
	firmware file you wish to use. Then click “Upgrade”
	button to start firmware upgrade procedure.
	It’s recommended to use wired Ethernet connection
	when you use this function, and DO NOT
	DISCONNECT OR CLOSE WEB BROWSER
	DURING UPGRADE!
Reset	Clear all settings in the camera. Please think again
	before you do this, and then click this button to reset
	all settings.
	NOTE: IP address will be reset to default value
	“192.168.2.3” also. You’ll need to change the IP
	address setting of your computer if the camera is
	connects directly to it, or you’ll not be able to
	connect to this IP camera again.
Reboot Device	If you found the IP camera is responding slowly or
	behaves strange, you can click this button to try to
	reboot the IP camera, this may help.
LED Setting	Switch the LED light of this IP camera off, so “LAN”
	and “WLAN” LED on the IP camera will stop working,

45