Rosewill RXS-3211 user manual Open Ports Required by IP CAM

Wired Internet Camera RXS-3211 User Manual

5.3.2.2 Open Ports Required by IP CAM

To access IP CAM located behind router or firewall, you must open ports on router or firewall so you can access IP CAM from Internet.

1.Go to your router’s setup page, and locate “NAT”, “Firewall”, “Port Mapping”, “Port Forwarding”, or similar setup item.

2.Enable this function, and fill IP CAM’s IP address in “Private IP” (or similar field), select “TCP” or “BOTH” as data type, and input these port numbers for the services you wish to access from Internet:

IP CAM web configuration and view live image: 80

AV Control Port: 4321

RTSP: 554 and 50000 to 60000

Please note that if you changed the port number of web configuration / view or RTSP, you have to change the port forwarding setting for your router accordingly.

83