Wired Internet Camera | User Manual | |
|
|
|
Internet connection. However, when the network connection is slow, a lower frame rate / resolution setting will help resolve this issue.
d.Adjust the antenna if you’re using wireless connection. The antenna should be perpendicular to the ground to get best reception, and the distance between IP camera and computer / wireless access point should not be too far.
e.Try to adjust “MTU” setting if you’re using PPPoE to connect to Internet. Ask your ISP or network administrator for detailed instruction.
5.2.3 IP camera is not responding
a.Is the network cable or wireless connection disconnected? Please check it.
b.Unplug the power adapter from wall socket and plug it in again after 10 seconds, then try to connect to the IP camera again.
c.If IP camera is correctly powered (“Power” LED is on), but you still can not connect to the camera when you’re sure that IP address is correct, please contact Rosewill’s customer service for help).
5.2.4Image is fuzzy
a.Use a soft cloth to clean the lens on the camera. (You can use cloth with water, but DO NOT use alcohol or other chemical solution to apply on the lens.)
b.Try to adjust brightness setting.
75