Rosewill RNX-N300X Profile Name, Ssid, Power Save Mode, RTS Threshold, Fragment Threshold

Wireless LAN PCI Card RNX-N300X User Manual

Adding a new profile

1. Click the “Add” button. The add profile window pops up.

Note: you could also add a new “Network” function then press the

profile quickly by selecting an available network in the “Add to Profile” button.

2. Fill in information for this profile in the system config section:

Profile Name	Choose a name for this profile, or use default name defined by
	system.
SSID	Fill in the intended SSID name or use the drop list to select from
	available Aps.
Power Save Mode	Choose from CAM (Constantly Awake Mode) or PSM (Power
	Saving Mode).
Network Type	There are two types, infrastructure and 802.11 Ad-hoc mode.
	Under Ad-hoc mode, you could also choose the preamble type;
	the available preamble type includes auto and long. In addition to
	that, the channel field will be available for setup in Ad-hoc mode.
RTS Threshold	For adjusting the RTS threshold number by sliding the bar or key in
	the value directly. The default value is 2347.
Fragment Threshold	Adjust the Fragment threshold number by sliding the bar or key in
	the value directly. The default value is 2346.

3. Select an encryption type and fill in the corresponding wireless network information:

15