Rosewill RNX-N300X Authentication Type, Encryption Type, 802.1x, WPA Pre-shared Key, WEP Key

Wireless LAN PCI Card RNX-N300X User Manual

Authentication Type	There are 7 types of authentication modes supported by RaUI
	including open, Shared, LEAP, WPA and WPA-PSK, WPA2
	and WPA2-PSK
Encryption Type	For open and shared authentication mode, the selection of
	encryption type are None and WEP. For WPA, WPA2,
	WPA-PSK and WPA2-PSK authentication mode, the
	encryption type supports both TKIP and AES.
802.1x	Use 802.1x to make WPA and WPA2 certification. This
	functions only works when connecting to a WPA and WPA2
	supported device.
WPA Pre-shared Key	This is the shared secret between AP and STA. For WPA-PSK
	and WPA2-PSK authentication mode, this field must be filled
	with character longer than 8 and less than 32 length.
WEP Key	Only valid when using WEP encryption algorithm. The key
	must matched AP's key.

4. Specify the 802.1x information if you are using the 802.1X certification method.

Users that don’t use this function or connecting to an open-wireless network please skip this part.

16