Rosewill RNX-N300X user manual Security Setting, Access Control, Group Rekey Interval

Wireless LAN PCI Card RNX-N300X User Manual

4.2Security Setting

This page pops up after clicking the Security Settings button. Please follow the instructions below:

Authentication Type	Select to be open or WPA-PSK system.
Encryption Type	Select an encryption type from the drop list.
WPA Pre-shared Key	A shared string between AP and STA. For WPA-PSK
	authentication mode, this field must be filled with
	character longer than 8 and less than 32 length. (PCI only)
Group Rekey Interval	Only valid when using WPA-PSK encryption algorithm. The
	key will change compliance with seconds or beacon that
	user set. (PCI device only)
WEP Key	Only valid when using WEP encryption algorithm. The key
	must match the key on AP. There are several formats to
	enter the keys.
	a. Hexadecimal (40bits): 10 Hex characters.
	b. Hexadecimal (128bits): 32Hex characters.
	c. ASCII (40bits): 5 ASCII characters.
	d. ASCII (128bits): 13 ASCII characters.

4.3Access Control

This function filters users to use this device by designating MAC address. Please refer to the following

chart for introduction.

34