Rosewill EASYN400 user manual 107

Wireless RouterRNX-EasyN400 User Manual

with a battery for when power is lost, i.e. Time Warner Cable Modems, will keep the modem on and connected. Due to the ADSL/Cable modem not assigning the correct DHCP information, the Rosewill Routers can not work correctly and assign a DHCP to the client computers.)

•Make sure you entered your ISP account information correctly in the wizard. These fields are case-sensitive, so make sure [Caps Lock] is not on.

•If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are the same as the settings in the Router Mode.

•Follow the process of Section 1.7 on Page 7. Use cable to connect your RNX-EasyN400, use web browser to link to RNX-EasyN400.

•If your RNX-EasyN400 is being set as a repeater, you will need to manually set your computer’s IP address. Please follow the steps in Section 2.3.3 Connecting to RNX-EasyN400 in AP Repeater Mode on Page 22.

•If the problem continues, contact your ISP.

Q:I cannot access the Internet anymore. I had access to the Internet (with the RNX- EasyN400), but my Internet connection is not available anymore..

A: Check the hardware connections, and make sure the LEDs are behaving as expected.

•Reboot the RNX-EasyN400.

•If the problem continues, contact your ISP.

Q: My internet connection is slow.

A:There might be a lot of traffic on the network. Look at the LEDs, to see if RNX- EasyN400 is transferring and receiving a lot of information. Try closing some programs that use the Internet, especially peer-to-peer applications.

•Check the signal strength. If the signal strength is low, try moving the RNX- EasyN400 closer to the AP if possible, and look around to see if there are any devices

107