Rosewill EASYN400 user manual AP Repeater Mode

Wireless RouterRNX-EasyN400 User Manual

NOTE:

After Wireless settings are applied, you need to connect from your WLAN client with the security settings you just finished configuring. Remember to write down the type of security & security key you selected.

2.3.2 AP Repeater Mode

AP Repeater mode is the Repeater mode which will extend your wireless signal, but does not enable WAN interface. Setup Wizard will skip WAN Configuration when you select this mode. Click <Next> when select AP Repeater Mode.

NOTE:

For Detail step by step guides, please refer to page 89 for AP Repeater Mode.

The Wizard will prompt you to enter the SSID which you want to use for this Repeater based on your security level. After type-in your desire SSID, click <Next>

21