Rosewill EASYN400 user manual Navigating RNX-EasyN400 in AP Router Mode, System

Wireless RouterRNX-EasyN400 User Manual

3.2.1 Navigating RNX-EasyN400 in AP Router Mode

Click on the side menu selection on System, The picture screen below shows the status screen in AP Router Mode.

3.2.1.1 RNX-EasyN400 Side Menu Description Table – AP Router Mode

LABEL		DESCRIPTION
	Status	This shows the RNX-EasyN400’s general device, system and interface status
		information.
	LAN	This is where you can configure LAN IP address, subnet mask, also to enable DHCP
System		server and IP range.
(For detail,	DHCP	Use this screen to view current DHCP client information and to always assign an IP
please see		address to a MAC address (and host name).
Page 34.)	Schedule	This is where you can set to schedule your wireless internet service
	Log	This is where RNX-EasyN400 stores the event log file based on the process.
	Monitor	You will see graphical diagrams showing the Bandwidth for WAN and WLAN.
	Language	You can select to have other language.
Wizard		You will be guide to setup your router based on a step by step process to either AP
(For detail, please see Page
		router mode or AP Repeater mode.
42.)

28