SATA II/ATA 133 PCIe Card RC216 | User Manual | |
|
|
|
start the computer.
2.During boot press Ctrl+J to enter the RAID BIOS.
3.Select Rebuild Mirror Drive press Enter.
4.Please use arrow keys ↑ and ↓to select the array you want to rebuild, press Enter.
5.Please use arrow keys ↑ and ↓to select the destination disk, press Enter.
6.When rebuilding is finished, select Save And Exit Setup, press Enter. When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.
BIOS Configuration
The PCIe SATA II 300 + PATA Raid Card BIOS will appear every time your system starts up. During this (POST) process, the BIOS will show up and indicate the devices attached to it.
Driver Installation
For Windows® 2000, XP and Server 2003
For New Installation
A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the
10