SATA II/ATA 133 PCIe Card RC216 | User Manual | |
|
|
|
RAID 0+1 | Disk Striping |
| + Mirroring |
JBOD | Disk Concatenation |
4
2 or 3 or 4
RAID 0 (Striping)
1.As the BIOS boots press Ctrl+J when prompted to enter the RAID BIOS.
2.At the next screen select Create RAID Disk Drive, press Enter.
3.Enter RAID name, press Enter.
4.Please use arrow keys ↑ and ↓to switch the RAID level to
5.Please use arrow keys ↑ and ↓to switch the disk, use the “space” key to mark the selected disk, then press Enter.
6.Please use arrow keys ↑ and ↓ to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K, then press Enter.
7.Input the RAID size, press Enter.
8.When asked Created RAID on the select HDD (Y/N)?, press Y to accept.
9.At the next screen select Save And Exit Setup, press Enter. When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.
RAID 1 (Mirroring)
1.As the BIOS boots press Ctrl+J when prompted to enter the RAID
6