Rosewill RC216 user manual For Windows Vista-x64

SATA II/ATA 133 PCIe Card RC216 User Manual

5.Insert the floppy disk, please select JMicron JMB36X Controller (A:\jraid_f.inf), then press Next. (Change A:\ to match your floppy drive letter)

6.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At the Found New Hardware Wizard window pop-up, please click Cancel button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

3.Please insert the CD driver bound with PCIe SATA II 300 + PATA Raid Card into your CD-ROM Drive.

4.At the Windows desktop, click Start, then Run.

5.Type D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

6.Follow the on-screen instructions to complete the installation.

7.Restart Windows to complete the installation.

For Windows® Vista-x64

For New Installation

A new installation requires a floppy disk for the driver installation. To

14