Rosewill RC216 user manual For Windows Vista

Page 13

SATA II/ATA 133 PCIe Card RC216

User Manual

 

 

 

Windows.

2.At the Found New Hardware Wizard window pop-up, please click Cancel button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

3.Please insert the CD driver bound with PCIe SATA II 300 + PATA Raid Card into your CD-ROM Drive.

4.At the Windows desktop, click Start, then Run.

5.Type D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

6.Follow the on-screen instructions to complete the installation.

7.Restart Windows to complete the installation.

For Windows® Vista

For New Installation

A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the RC-216\Floppy32 folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.Restart the computer when prompted by Windows’ installation.

4.At the Windows Setup screen, press Load Driver to install the driver.

13

Image 13
Contents Sata II / ATA 133 PCIe Card RC216 Connectors Features and BenefitsPackage Contents System RequirementsSata II/ATA 133 PCIe Card RC216 Hardware Description RAID Arrays Hardware InstallationRAID 1 Mirroring RAID 0 StripingConcatenation Jbod Delete RAID Disk Drive RAID 0+1 Striping + MirroringRebuild Mirror Drive Solve Mirror ConflictDriver Installation Bios ConfigurationFor Windows 2000, XP and Server For An Existing Installation For Windows XP-x64/Server For Windows Vista WindowsFor Windows Vista-x64 For An Existing Installation To Verify Driver Installation