Rosewill RC216 user manual For An Existing Installation

Page 11

SATA II/ATA 133 PCIe Card RC216

User Manual

 

 

 

directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.Restart the computer when prompted by Windows’ installation.

4.At the Windows Setup screen, press F6 to install the RAID driver.

5.When prompted, press S to specify the location of the driver.

6.Insert the floppy disk, then press Enter.

7.Select (Windows 2000) RAID Driver for JMicron JMB363 Controller or (Windows XP/2003) RAID/AHCI Driver for JMicron JMB36X Controller, then press Enter.

8.Press Enter to finish driver installation, then follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At the Found New Hardware Wizard window pop-up, please click Cancel button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

3.Please insert the CD driver bound with PCIe SATA II 300 + PATA Raid Card into your CD-ROM Drive.

4.At the Windows desktop, click Start, then Run.

5.Type D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your

11

Image 11
Contents Sata II / ATA 133 PCIe Card RC216 System Requirements Features and BenefitsConnectors Package ContentsSata II/ATA 133 PCIe Card RC216 Hardware Description RAID Arrays Hardware InstallationRAID 1 Mirroring RAID 0 StripingConcatenation Jbod Delete RAID Disk Drive RAID 0+1 Striping + MirroringRebuild Mirror Drive Solve Mirror ConflictFor Windows 2000, XP and Server Bios ConfigurationDriver Installation For An Existing Installation For Windows XP-x64/Server For Windows Vista WindowsFor Windows Vista-x64 For An Existing Installation To Verify Driver Installation