Installing the PCI card
Ground yourself to a grounded metal object before installing the PCI card
1.Remove the computer cover and locate an
2.Install the MultiStation PC PCI card in the PCI slot by firmly applying uniform pressure on the top of the card until it seats properly in the PCI slot
3.Secure the PCI card with the proper size screw
4.Replace the computer cover
Figure 2. PCI card
Note: The two dipswitches located on the MultiStation PC’s PCI card should initially be in the “OFF” position (Default shipped position). If the dipswitches are not in the “OFF” position, set them both to the “OFF” position before applying any power.
DO NOT install additional cards and remote user modules at this time. Complete the installation for one and have one user fully operational before installing additional cards.
MULTISTATION PC INSTALLATION AND OPERATIONS MANUAL | 7 |
|
|