Rose electronic UL-V3 manual KVM Switch

Page 51

Configuration Settings

KVM Switch

An administrator may use the Switch Settings tab to perform the following functions. See the section Using a KVM Switch.

Activate UltraLink KVM features of any Viewer that logs in to this UltraLink

Name KVM switch ports to allow the names to appear in the remote computer select list on the toolbar after a login

Device

The Device list box specifies the device type attached to an UltraLink – remote computer or KVM switch. The device may be: standalone PC, one of the KVM switches in the list, or custom. Use standalone PC if the UltraLink connects to a PC. If you select standalone PC, all KVM switch features of the Viewer are disabled. If you select a KVM switch from the list, you do not need to define keystrokes for port switching, but you may assign symbolic names to the ports. If you select custom, you must define the keyboard events that cause a KVM switch to switch from one port to another.

Ports

The Ports field specifies how many ports on the KVM switch are used. A standalone PC device uses only one port, but you may specify the number of ports for other devices. Change the number in the Ports field by typing a different number. Smaller numbers remove existing entries at the end of the list; larger ones add blank entries.

When you press Enter or Tab in the control or another control in the dialog gets the focus, the value in the Ports field is validated. The number of ports must be a positive number between 1 and 9999. If the number is valid, the switch settings table updates with the new number of ports.

Import

The Import button allows importing a switch file into the switch settings table. The imported file is a text file with .txt extension. The Viewer validates the file before importing it into the table. If the file is invalid, the operation is cancelled. See Using a KVM Switch for the format of a switch text file.

Export

When you select the Export button, the Viewer saves switch settings in a text file after you provide a file name and location.

UltraLink User Manual

 

33

 

 

 

 

 

Image 51
Contents UltraLink Limited Warranty Page Page Introduction Viewer installation UltraLink UL-V3 Connections Viewer installation UltraLink UL-LV3 Introduction Connections UltraLink configuration Viewer configuration Viewer operation UltraLink UL-DV3 Introduction Install the Viewer on a CP on your network UltraLink UL-QV3 Nstalling the U Ltral INK V Iewer Ndex Introduction KVM Video Resolution UL-V3 Back Panel Front PanelGetting Started BoxYou Will Need There are two ways to connect the UltraLink ConnectionsStart Up Power OnConfigure login screen About LoginsUsing Connect Login for the First Time Using Configure Login for the First TimeConfigure screen Configure ScreenPassword Defeat Connect ContentionInstalling the UltraLink Viewer Setup WizardRequirements Using the Viewer for the First Time Toolbar Menu CommandsViewer Screen Title BarDisplay Area Windows Buttons Status BarQuestion mark help Question Mark HelpFile Menu CommandsView ConnectMenu Commands Page Shortcuts Menu Commands Full ScreenSettings Connections About Box HelpConfiguration Settings Connections An UltraLink address Active Keyboard and MouseCtrl+Alt+Del Configure hot keys and mouse escape movements KVM Switch Port Security User ID Dialback Number User Details Connecting and Logging ConnectingLogin Fast mouse escape movement Slow mouse escape movement Pass-through ModePage Disconnecting Scaled and Scrolled View ModesAuto Size Scroll bars allow native resolution in a small windowAuto Size fits image exactly into the display area Full-screenColor Modes Using a KVM Switch KVM Switch FeaturesRemote Computer Select Quad Screen Key codes are editable for custom switches Switch File Import and ExportBlank, reserved for future use Safety Rack mount illustration Appendix A. Rack mountIndex Index Page Stancliff Road