PowerDsine PD-6006, PD-6012, PD-6024 manual Port Indications, Power Status Indications

Page 9

PD-6006/12/24

2.3.2Port Indications

One bi-color indicator (green and orange), per port, provides port status:

Green indicates that the terminal unit has been identified as "Power over LAN Enabled" and is active and receiving power. Orange indicates that the port is not supplying power and is not active.

Refer to Table 2-2 for additional information.

Note Due to the standard detection process performed on each PoL port, power will not be supplied to an Ethernet device, that is not PoL-enabled (indicated in orange or off). In this way, Ethernet devices (not PoL-enabled) will not be affected by this connection.

Table 2-1: Power Status Indications

Indicator

Color

Main Power

Remarks

Status

 

 

 

 

 

 

Internal power

Internal power supply voltage

 

Off

supply unit is

is too low. All ports are

 

unplugged or

disconnected.

 

 

 

 

faulty.

 

 

 

 

 

 

AC

 

Indicates AC

Internal power supply voltage

Green

power input

is within tolerance.

 

 

 

active.

 

 

 

 

 

 

 

Green

Internal power

All ports are disconnected.

 

supply voltage is

 

 

 

blinking

 

 

 

out of tolerance.

 

 

 

 

 

 

 

 

 

 

 

Off

No DC input

DC input voltage is too low.

 

power available.

All ports are disconnected.

 

 

DC

 

Indicates DC

DC input voltage is within

Green

power input

tolerance.

 

 

active.

 

 

 

 

 

 

 

Green

DC Input voltage

All ports are disconnected.

 

blinking

is out of tolerance.

 

 

 

 

 

 

AC and DC

Orange

Internal problem

Built in Test (BIT) failed.

alarm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power over LAN Solutions

9

Cat. No.: 06-6800-056

Image 9
Contents Power over LAN Midspans Disclaimer Contents Safety Standard Approvals Verifying Kit ContentsModel Numbers Definition Electrical Compatibility ApprovalsGeneral Guidelines Safety InformationDisconnecting the power cord from the outlet Power CordPower Management About the Power over LAN MidspanData & Power Output Ports IndicatorsPrimary Power Indicators 10/100BASE-TX Ports DefinitionPort Indications Power Status IndicationsPort Status Indications ConnectorsInstalling the Power over LAN Midspan Background InformationRack Mounting Brackets Connecting Power Cables Connecting Ethernet CablesPowering up TroubleshootingTroubleshooting Steps Troubleshooting GuideParameter PD-6006 PD-6012 PD-6024 Symptom Corrective StepsManagement Deployment Remote Power ManagementPart Number Release