PD-6006/12/24
3 Installing the Power over LAN Midspan
3.1Background Information
As shown in Figure 3-1, the Midspan is connected in series to an Ethernet switch/hub. The data outputs from the switch are connected to the Midspan. The Midspan delivers power over spare twisted pairs (pins 7/8 and pins 4/5) of the Category 5 cabling, without degrading the quality of data communications. Most installations require the Midspan to be rack mounted, as described hereafter.
Figure 3-1: Typical Installation
3.2Rack Mounting Brackets
The Midspan comes with 19-in. mounting brackets and screws. To install the Midspan into a 19-in. rack, first remove the self- adhesive rubber feet from the bottom surface. Install the brackets using two screws per side. Rack-mounting screws are not provided.
Figure 3-2: Installing Mounting Brackets
Power over LAN Solutions | 11 | Cat. No.: 06-6800-056 |
