Multi Media | Re:source |
Info - Status overview
The Info softkey shows the status of the currently selected source.
Wifi Level [%]
The Wifi level displays the strength of the Access point reception. If this should get
too low, you may have to reposition it.
The Wifi level does not indicate anything about the speed of the Internet access.
In the example shown below, the track When I Kissed The teacher by ABBA from the Album Arrival is playing. This title was stored with a data rate of 192 Kbps.
Bit rate [kpps]
The data rate with which the selected radio station transmits or a track was compressed.
Buffer [%]
The filling level of the MMM data buffer that is used to balance out
MMMfluctuations in the data streaming. The buffer display should always be 100%. If it reaches 0%, playback is stopped until data is received again.
26
The Wifi level is displayed permanently, even in the case of sources that do not receive their data over the WLAN, e.g. a USB hard disc.
Walls, atmospheric pressure and humidity affect the quality of the WLAN wireless connection, as well as the positioning of the components.