Chapter 1 | Introduction |
The Extended Battery Module (EBM) can be added to the
Powerware® BladeUPS® uninterruptible power system (UPS) to extend the available battery time (see Table 1). Up to four EBMs can be installed with the Powerware BladeUPS.
Table 1. Battery Runtimes (in Minutes)
Model | UPS Internal | +1 EBM | +2 EBMs | +3 EBMs | +4 EBMs | |
Batteries | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
BladeUPS 12 | 4.8 | 12 | 20 | 27 | 34 | |
|
|
|
|
|
| |
BladeUPS 12i | 4.8 | 12 | 20 | 27 | 34 | |
|
|
|
|
|
|
NOTE Battery times are approximate and vary depending on the load configuration and battery charge.
Safety Warnings
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that you should follow during installation and maintenance of the EBM. Please read all instructions before operating the equipment and save this manual for future reference.
W A R N I N G
This UPS contains its own energy source (batteries). The UPS output receptacles may carry live voltage even when the UPS is not connected to an AC supply.
C A U T I O N
SBatteries can present a risk of electrical shock or burn from high
SProper disposal of batteries is required. Refer to your local codes for disposal requirements.
SNever dispose of batteries in a fire. Batteries may explode when exposed to flame.
EATON Powerware® BladeUPS® EBM User's Guide S 164201650 Rev 2 www.powerware.com | 1 |