Powerware none manual Rear Rail Screw Positions for the EBM

INSTALLATION

4.Using two clip nuts and two hex-head screws, attach the rail to the rear of the rack (see Figure 4 and Figure 5).

The bottom rail uses positions 2 and 4 for the rear hex-head screws. If you are installing additional rails, place the next rail 7 holes above the last installed screw.

Position 13

Second Rail

Position 11

Position 4

First Rail

Position 2

Figure 4. Rear Rail Screw Positions for the EBM

Clip Nuts

Figure 5. Securing the Rear Rail

EATON Powerware® BladeUPS® EBM User's Guide S 164201650 Rev 2 www.powerware.com 17