SUPER P3TDDR User’s Manual
Power Button
The PW_ON connector is located on pins 1 and 2 of JF1. Momen- tarily contacting both pins will power on/off the system. The user can also configure the power on button to function as a suspend button (see the Power Button Mode setting in BIOS). To turn off the power when set to suspend mode, hold down the power but- ton for at least 4 seconds. See the table on the right for pin defini- tions.
Reset Button
The Reset connector is located on pins 3 and 4 of JF1. This connec- tor attaches to the hardware reset switch on the computer case . See the table on the right for pin definitions.
Overheat LED
The Overheat LED connector is lo- cated on pins 7 and 8 of JF1. It attaches to an LED to to provide warning of chassis overheating. See Table
NIC1/2 LED
The NIC1/2 (LAN) LED connectors are located on pins 9&10/11&12 of JF1. Attach the NIC LED cable to the correct pins for each LAN. See the table on the right for pin definitions.
P o w e r B utto n P in
D e finitio ns (J F 1 )
P in
N umber D efinition
1P W _O N
2G round
R e s e t B utto n P in
D e finitio ns (J F 1 )
P in
N umber D efinition
3R eset
4G round
O ve rhe a t L E D
P in D e finitio ns (J F 1 )
P in |
|
N umber | D efinition |
7 | LED + |
8 | LED - |
|
|
N IC 1 /2 L E D P in
D e finitio ns (JF 1 )
Pin | Definition | |
Number | ||
| ||
9/11 | LED + | |
10/12 | LED - | |
|
|