SUPER MICRO Computer H8DCT-HLN4F user manual  SouthBridge Configuration,  IDE Configuration

Page 60

H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL

SouthBridge Configuration

OHCI/EHCI HC Device Functions

These settings allow you to either Enable or Disable functions for OHCI or EHCI bus devices.

USB 2.0 Controller Mode

Use this setting to configure the USB 2.0 Controller in either Hi-Speed (480 Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed Mode) or Disabled (Full Speed Mode).

Legacy USB Support

Select "Enabled" to enable the support for USB Legacy. Disable Legacy support if there are no USB devices installed in the system. "Auto" disabled Legacy support if no USB devices are connected. The options are Disabled, Enabled and Auto.

IDE Configuration

OnChip SATA Channel

This setting allows you to Enable or Disable the OnChip SATA channel.

OnChip SATA Type

Use this setting to set the OnChip SATA type. Options include Native IDE, RAID, AMD_AHCI and Legacy IDE.

RAID Codebase

This submenu appears when you choose "RAID" from the "OnChip SATA Type" setting above. This setting allows you to select the codebase for using your RAID setup. Options are either Adaptec or DotHill.

SATA IDE Combined Mode

This setting allows you to Enable or Disable the SATA IDE combined mode.

PATA Channel Configuration

This allows you to set PATA channel configuration. Options include SATA as Primary or SATA as secondary.

4-6

Image 60
Contents Super Page Preface About This ManualManual Organization Page Table of Contents Troubleshooting Bios Viii Checklist Chapter IntroductionOverview Contacting Supermicro HeadquartersEurope Asia-PacificH8DCT-HLN4F Image H8DCT-HIBQF Image H8DCT-HLN4F/HIBQF Serverboard Layout H8DCT-HLN4F/HIBQF Quick Reference DescriptionServerboard Features MemoryChipset Expansion SlotsAcpi Features DimensionsOnboard I/O OtherAMD SR5670 or SR5690 and SP5100 Chipset System Block Diagram Chipset Overview PC Health MonitoringAMD AMD SR5670 or SR5690 and SP5100 Chipset HyperTransport TechnologyPower Configuration Settings Power Supply Main Switch Override MechanismSuper I/O Page Page Chapter Installation Battery HandlingStandardized Warning Statements About Standardized Warning StatementsPage רצומה קוליס Product DisposalPage Processor and Heatsink Installation Installation ProcedureInstalling the Heatsinks Installing Memory Mounting the Serverboard into a ChassisMemory Support Maximum MemoryDimm Module Population Configuration Per Channel Dimm Populations OptionsInstalling a PCI Expansion Card PCI Expansion CardsI/O Port and Control Panel Connections I/O Port Locations and DefinitionsConnector Definitions Fan HeaderLAN1/2/3/4 Ethernet Ports Unit Identifier ButtonJP1 Adapter Card Connector Overheat LEDUSB Headers SXB1 Adapter Card Slot/Connector Trusted Platform Module HeaderJumper Settings Explanation of JumpersCmos Clear VGA Enable/Disable LAN Enable/DisableInfiniBand Port Enable/Disable I2C to PCI-Express SlotsOnboard Indicators Watch Dog Enable/DisablePower LED LAN1/LAN2/LAN3/LAN4 LEDsInfiniBand LED Indicators Dedicated Ipmi LAN LEDsUID LED LE1 Installing the OS/SATA Driver Enabling Sata RAIDSerial ATA Sata Enabling Sata RAID in the Bios Bios Setup ScreenDotHill RAID Utility Program Screen Using the DotHill and Adaptec RAID Utility Installing the RAID Driver During OS InstallationInstalling Drivers Driver/Tool Installation Display ScreenSupero Doctor Supero Doctor III Interface Display Screen Remote Control Serverboard Battery 10. Installing the Onboard BatteryPage Chapter Troubleshooting Troubleshooting ProceduresBefore Power On No PowerTechnical Support Procedures Memory ErrorsLosing the System’s Setup Configuration No VideoFrequently Asked Questions Question How do I update my BIOS?Question What type of memory does my motherboard support? Question Whats on the CD that came with my motherboard?Returning Merchandise for Service Starting the Setup Utility ChapterIntroduction Advanced Settings Menu  Boot FeatureMain Menu  Processor and Clock Options  Advanced Chipset Control  NorthBridge Configuration  Memory Configuration ECC Configuration  Dram Timing Configuration SouthBridge Configuration  IDE ConfigurationLBA/Large Mode PIO ModeDMA Mode Primary/Secondary/Third/Fourth IDE Master/Slave PCI/PnP Configuration  SuperIO Device Configuration  Remote Access Configuration CPU Overheat Alarm  Hardware Health ConfigurationFan Speed Control Modes Headless Mode  Acpi ConfigurationAcpi Aware O/S Acpi Apic Support Ipmi Configuration View BMC System Event LogSet LAN Configuration  Event Log Configuration Change Supervisor Password Change User PasswordBoot Sector Virus Protection Security MenuBoot Menu Exit Menu Page Appendix a Bios Error Beep Codes Amibios Error Beep CodesPage Appendix B Bios Post Checkpoint Codes Uncompressed Initialization CodesBootblock Recovery Codes Checkpoint Code DescriptionUncompressed Initialization Codes Checkpoint Code Description Appendix B Bios Post Checkpoint Codes Checkpoint Code Description

H8DCT-HLN4F specifications

SUPER MICRO Computer H8DCT-HLN4F is a powerful and versatile server motherboard designed to meet the demanding requirements of enterprise-class applications and high-performance computing environments. Built for reliability and efficiency, this motherboard provides a robust platform for a wide range of configurations, making it a popular choice for businesses looking to enhance their IT infrastructure.

One of the main features of the H8DCT-HLN4F is its support for AMD Opteron processors, specifically the 6100 and 6200 series, which allows for high core counts and excellent multi-threading capabilities. This platform is designed to handle data-intensive operations and demanding workloads, making it suitable for virtualization, database management, and other enterprise applications.

The motherboard features eight DDR3 DIMM slots, supporting up to 256GB of memory. This significant memory capacity, combined with error-correcting code (ECC) support, ensures data integrity and enhances the reliability of mission-critical applications. Additionally, the H8DCT-HLN4F supports a memory speed of up to 1866 MHz, providing a performance boost in data processing tasks.

Storage options on the H8DCT-HLN4F are robust, featuring multiple SATA and SAS ports. It can accommodate up to eight SATA 6Gb/s or SAS connections, allowing for extensive storage capabilities. This is particularly beneficial for businesses needing to manage large amounts of data safely and efficiently.

In terms of connectivity, the motherboard provides multiple PCI Express slots for expanded I/O capabilities. This means that users can install additional network cards, RAID controllers, or graphics cards to enhance performance as needed. The integrated dual Gigabit Ethernet ports also allow for efficient networking, ensuring that data can be transferred quickly and reliably across the network.

The H8DCT-HLN4F motherboard is designed with advanced thermal management features, including support for Supermicro’s proprietary thermal sensors. These sensors monitor system temperatures and adjust fan speeds accordingly, ensuring optimal cooling performance. This feature contributes significantly to the longevity and stability of the system.

In conclusion, the SUPER MICRO Computer H8DCT-HLN4F motherboard is an ideal choice for organizations seeking a flexible and scalable solution for their server needs. With its combination of powerful processing capabilities, ample memory support, reliable connectivity options, and advanced thermal management, this motherboard is constructed to support the demanding workloads of today’s enterprise environments. As businesses continue to evolve technologically, the H8DCT-HLN4F provides a strong foundation for future growth and innovation.