SUPER MICRO Computer SuperServer 5016I-TF user manual Advanced Setup Configurations, Xboot Feature

Page 70

SUPERSERVER 5016I-T/5016I-TF User's Manual

7-3 Advanced Setup Configurations

Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items:

XBOOT Feature

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot. The options are Enabled and Disabled.

Quiet Boot

This option allows the bootup screen options to be modified between POST mes- sages or the OEM logo. Select Disabled to display the POST messages. Select Enabled to display the OEM logo instead of the normal POST messages. The op- tions are Enabled and Disabled.

AddOn ROM Display Mode

This sets the display mode for Option ROM. The options are Force BIOS and Keep Current.

Bootup Num-Lock

This feature selects the Power-on state for Numlock key. The options are Off and On.

PS/2 Mouse Support

This feature enables support for the PS/2 mouse. The options are Disabled, Enabled and Auto.

7-4

Image 70
Contents Super Manual Revision Release Date October 6 About This Manual PrefaceManual Organization Advanced Chassis Setup BiosPreface Table of Contents System Safety Advanced Chassis Setup Bios Page Chapter Introduction OverviewMotherboard Features Chassis Features Intel 3400/3420 Chipset System Block Diagram Europe Contacting SupermicroHeadquarters Asia-PacificPage Preparing for Setup Chapter Server InstallationUnpacking the System Choosing a Setup Location Rack PrecautionsAmbient Operating Temperature Rack Mounting ConsiderationsInstalling the System into a Rack Identifying the Sections of the Rack RailsInstalling the Chassis Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackAccessing the Inside of the System Figure Checking the Serverboard SetupChecking the Components Accessing the Inside of the System Checking the Drives Checking the Drive Bay SetupProviding Power Checking the AirflowChapter System Interface Reset ButtonPower Control Panel ButtonsOverheat/Fan Fail HDDSerial ATA Drive Carrier LEDs Page Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Motherboard Setup Connecting Data Cables Motherboard InstallationConnecting Cables Installing to the ChassisConnecting Power Cables Connecting the Control PanelProcessor and Heatsink Installation I/O PortsInstalling the LGA1156 Processor Page Installing a Passive CPU Heatsink Installing the HeatsinkRemoving the Heatsink Dimm Installation Installing MemoryMemory Support DDR3 ECC Registered Rdimm Memory Support Memory Population GuidelinesPopulated Any combination Per Channel Dimm Installation Installing a PCI Expansion Card Installing an Expansion CardMotherboard Details X8SIL/X8SIL-F LayoutX8SIL/X8SIL-F LED Indicators Number X8SIL/X8SIL-F Jumpers Number Description DefaultX8SIL/X8SIL-F Headers/Connectors Number Description Standby PWR LED Indicator Green Solid on PWR OnProcessor Power Connector Connector DefinitionsMain ATX Power Supply Connector Power ButtonPower On LED Overheat OH/Fan FailFan Headers Chassis IntrusionATX PS/2 Keyboard and PS/2 Mouse Ports Onboard SpeakerUniversal Serial Bus USB SpeakerSerial Ports LAN1/LAN2 Ethernet PortsAlarm Reset Onboard Power LEDPower Supply I2C Connector Sgpio 0/1 HeadersExplanation of Jumpers Jumper SettingsVGA Enable Cmos ClearUSB Wake-Up LAN1/LAN2 Enable/DisablePCI Slot SMB Enable BMC JumperIpmi Dedicated LAN LEDs Onboard IndicatorsLAN1/2 LEDs Ipmi Heartbeat LEDSata and Floppy Drive Connections Floppy ConnectorSata Ports Page Chapter Advanced Chassis Setup Static-Sensitive DevicesControl Panel Chassis Front ViewSystem Fan Failure System FansReplacing System Cooling Fans Accessing the Drive Bays Drive Bay Installation/RemovalSerial ATA Drive Installation Installing/Removing Sata Drives Mounting a Sata Drive in a Drive CarrierDVD-ROM Drive Installation Installing a DVD-ROM DrivePower Supply Failure Power SupplyReplacing the Power Supply Page Chapter Starting Bios Setup UtilityHow To Change the Configuration Data IntroductionMain Setup How to Start the Setup UtilityProcessor System Time/System DateSystem Memory Advanced Setup Configurations Xboot FeatureXProcessor & Clock Options Active Processor Cores Hardware Prefetcher Available when supported by the CPUIntel Eist Technology XAdvanced Chipset Control Xsata / Floppy Configuration PIO Mode IDE Detect Timeout secLBA/Large Mode TypeDMA Mode XPCI/PnP Configuration XSuper IO Device Configuration XRemote Access Configuration CPU Temperature CPU Overheat AlarmSystem Temperature XHardware Health ConfigurationFan Speed Control Modes Xacpi Configuration Xipmi Configuration X8SIL-F Only XEvent Log Configuration XIntel TXT LT ConfigurationBios AS Sclean Bios AC Scheck User Password Security SettingsSupervisor Password Change Supervisor PasswordXBoot Device Priority Boot SettingsBoot Sector Virus Protection XRemovable Drives Retry Boot DevicesExit Options XCD/DVD DrivesDiscard Changes and Exit Load Optimal DefaultsLoad Fail-Safe Defaults Discard ChangesPage Appendix a Post Error Beep Codes Recoverable Post Error Beep CodesPage Appendix B Installing Windows Installing Windows to a RAID SystemInstalling Windows to a Non-RAID System Bios Appendix C System SpecificationsWeight Appendix C System Specifications