SUPER MICRO Computer SuperServer 5016I-TF Exit Options, XRemovable Drives, XCD/DVD Drives

Page 88

SUPERSERVER 5016I-T/5016I-TF User's Manual

XRemovable Drives

This feature allows the user to specify the boot sequence from available Removable Drives. The settings are 1st boot device, 2nd boot device, and Disabled.

•

•

1st Drive

2nd Drive - [USB: XXXXXXXXX]

Retry Boot Devices

Select this option to retry booting from the conﬁgured boot devices if the systems fail to boot initially. The options are Disabled and Enabled.

XCD/DVD Drives

This feature allows the user to specify the boot sequence from available CD/DVD Drives (i.e., 1st Drive, 2nd Drive, etc).

7-6 Exit Options

Select the Exit tab from the AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen.

Save Changes and Exit

When you have completed the system conﬁguration changes, select this option to leave the BIOS Setup Utility and reboot the computer, so the new system con- ﬁguration parameters can take effect. Select Save Changes and Exit from the Exit menu and press <Enter>.

7-22

Image 88

Contents Super Manual Revision Release Date October 6 About This Manual PrefaceManual Organization Advanced Chassis Setup BiosPreface Table of Contents System Safety Advanced Chassis Setup Bios Page Chapter Introduction OverviewMotherboard Features Chassis Features Intel 3400/3420 Chipset System Block Diagram Contacting Supermicro HeadquartersEurope Asia-PaciﬁcPage Preparing for Setup Chapter Server InstallationUnpacking the System Choosing a Setup Location Rack PrecautionsAmbient Operating Temperature Rack Mounting ConsiderationsInstalling the System into a Rack Identifying the Sections of the Rack RailsInstalling the Chassis Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackAccessing the Inside of the System Figure Checking the Serverboard SetupChecking the Components Accessing the Inside of the System Checking the Drive Bay Setup Providing PowerChecking the Drives Checking the AirﬂowReset Button PowerChapter System Interface Control Panel ButtonsOverheat/Fan Fail HDDSerial ATA Drive Carrier LEDs Page Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Motherboard Setup Motherboard Installation Connecting CablesConnecting Data Cables Installing to the ChassisConnecting Power Cables Connecting the Control PanelProcessor and Heatsink Installation I/O PortsInstalling the LGA1156 Processor Page Installing a Passive CPU Heatsink Installing the HeatsinkRemoving the Heatsink Dimm Installation Installing MemoryMemory Support DDR3 ECC Registered Rdimm Memory Support Memory Population GuidelinesPopulated Any combination Per Channel Dimm Installation Installing a PCI Expansion Card Installing an Expansion CardMotherboard Details X8SIL/X8SIL-F LayoutX8SIL/X8SIL-F Jumpers Number Description Default X8SIL/X8SIL-F Headers/Connectors Number DescriptionX8SIL/X8SIL-F LED Indicators Number Standby PWR LED Indicator Green Solid on PWR OnConnector Deﬁnitions Main ATX Power Supply ConnectorProcessor Power Connector Power ButtonPower On LED Overheat OH/Fan FailChassis Intrusion ATX PS/2 Keyboard and PS/2 Mouse PortsFan Headers Onboard SpeakerSpeaker Serial PortsUniversal Serial Bus USB LAN1/LAN2 Ethernet PortsOnboard Power LED Power Supply I2C ConnectorAlarm Reset Sgpio 0/1 HeadersJumper Settings VGA EnableExplanation of Jumpers Cmos ClearLAN1/LAN2 Enable/Disable PCI Slot SMB EnableUSB Wake-Up BMC JumperOnboard Indicators LAN1/2 LEDsIpmi Dedicated LAN LEDs Ipmi Heartbeat LEDSata and Floppy Drive Connections Floppy ConnectorSata Ports Page Chapter Advanced Chassis Setup Static-Sensitive DevicesControl Panel Chassis Front ViewSystem Fan Failure System FansReplacing System Cooling Fans Accessing the Drive Bays Drive Bay Installation/RemovalSerial ATA Drive Installation Installing/Removing Sata Drives Mounting a Sata Drive in a Drive CarrierDVD-ROM Drive Installation Installing a DVD-ROM DrivePower Supply Failure Power SupplyReplacing the Power Supply Page Starting Bios Setup Utility How To Change the Conﬁguration DataChapter IntroductionMain Setup How to Start the Setup UtilityProcessor System Time/System DateSystem Memory Advanced Setup Conﬁgurations Xboot FeatureXProcessor & Clock Options Active Processor Cores Hardware Prefetcher Available when supported by the CPUIntel Eist Technology XAdvanced Chipset Control Xsata / Floppy Conﬁguration IDE Detect Timeout sec LBA/Large ModePIO Mode TypeDMA Mode XPCI/PnP Conﬁguration XSuper IO Device Conﬁguration XRemote Access Conﬁguration CPU Overheat Alarm System TemperatureCPU Temperature XHardware Health ConﬁgurationFan Speed Control Modes Xacpi Conﬁguration Xipmi Conﬁguration X8SIL-F Only XEvent Log Conﬁguration XIntel TXT LT ConﬁgurationBios AS Sclean Bios AC Scheck Security Settings Supervisor PasswordUser Password Change Supervisor PasswordXBoot Device Priority Boot SettingsBoot Sector Virus Protection Retry Boot Devices Exit OptionsXRemovable Drives XCD/DVD DrivesLoad Optimal Defaults Load Fail-Safe DefaultsDiscard Changes and Exit Discard ChangesPage Appendix a Post Error Beep Codes Recoverable Post Error Beep CodesPage Appendix B Installing Windows Installing Windows to a RAID SystemInstalling Windows to a Non-RAID System Bios Appendix C System SpeciﬁcationsWeight Appendix C System Speciﬁcations