SUPER MICRO Computer Chapter Blade Module Features, SBI-7226T-T2 Blade Unit Features

Chapter 4

Blade Module Features

Figure 4-1. SBI-7226T-T2 Blade Unit Front View

This chapter describes the SBI-7226T-T2 blade unit. Installation and maintenance should be performed by experienced technicians only.

See Figure 4-1for a front view of the blade unit and Table 4-1for its features.

	Table 4-1. SBI-7226T-T2 Blade Unit Features
Feature		Description
Processors		Supports Dual 1366-pin LGA Socket processors for up to two Intel 64-bit
		quad-core Xeon series processors.
		Supports up to 64 GB of ECC Registered DDR3-1333/1066/800 SDRAM
Memory		DIMMs or 16 GB of ECC Unbuffered DDR3-1333/1066/800 SDRAM
		DIMMs in six DIMM slots
Storage		One or two 2.5" hot-plug SATA hard disk drives per node
Ports		KVM port (1)
		Onboard Matrox G200eW Graphics chip with 16 MB of SDRAM, IPMI 2.0,
Features		Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3,
		Real Time Clock
Power Consumption		Base Power Draw (~35W) / Power per CPU (60W/80W/95W) / Power per
		DIMM (typically ~7W)

4-1