SBI-7226T-T2 Blade Module User’s Manual
PCI Express Configuration
The menu options in the PCI Express CONFIGURATION submenu and their descriptions are shown in Table
| Table |
|
|
Menu Option | Description |
Active State Power | This setting allows you to Enable or Disable PCI Express L0s and L1 link power |
Management | states. |
|
|
SMBIOS Configuration
The menu options in the SMBIOS CONFIGURATION submenu and their descriptions are shown in Table
| Table |
|
|
Menu Option | Description |
SMBIOS SMI Support | This setting allows you to Enable or Disable the SMBIOS SMI Wrapper support |
| for PnP func |
Remote Access Configuration
The menu options in the REMOTE ACCESS CONFIGURATION submenu and their descriptions are shown in Table
Table | ||
|
| |
Menu Option | Description | |
Remote Access | Allows you to Enable or Disable remote access. If enabled, the settings below | |
will appear. | ||
| ||
|
| |
Serial Port Number | Selects the serial port to use for console redirection. Options are COM1 and | |
COM2. | ||
| ||
Serial Port Mode | Selects the serial port settings to use. Options are (115200 8, n, 1), (57600 8, N, | |
1), (38400 8, N, 1), (19200 8, N, 1) AND (09600 8, N, 1). | ||
| ||
Flow Control | Selects the flow control to be used for console redirection. Options are None, | |
HARDWARE and SOFTWARE. | ||
| ||
Redirection After | Options are DISABLE (no redirection after BIOS POST), BOOT LOADER | |
(redirection during POST and during boot loader) and Always (redirection | ||
BIOS POST | ||
always active). Note that some OS's may not work with this set to Always. | ||
| ||
|
| |
Terminal Type | Selects the type of the target terminal: ANSI, VT100 and | |
Allows you to Enable or DISABLE | ||
Support | VT100 terminals. | |
|
| |
Sredir Memory | Use this setting to set the delay in seconds to display memory information. | |
Display Delay | Options are No Delay, 1 SEC, 2 SECS and 4 SECS. | |