SUPER MICRO Computer SBI-7226T-T2 user manual Event Log Configuration, Ipmi Configuration

SBI-7226T-T2 Blade Module User’s Manual

	Table 6-10. AHCI Configuration Submenu (Continued)
Menu Option		Description
SATA Port 0~5		This setting selects the type of device connected to the system.Options include
		Auto or Not Installed.
S.M.A.R.T.		S.M.A.R.T stands for Self-Monitoring, Analysis and Reporting Technology. This
		setting Enables or Disables the S.M.A.R.T. feature.

Event Log Configuration

The menu options in the EVENT LOG CONFIGURATION submenu and their descriptions are shown in Table 6-11.

	Table 6-11. Event Log Configuration Submenu
Menu Option	Description
View Event Log	Highlight this item and press <ENTER> to view the contents of the event log.
Mark All Events as	Highlight this item and press <ENTER> to mark all events as read.
Read
Clear Event Log	Select Yes and press <ENTER> to clear all event logs. The options are YES and
	NO to verify.

IPMI Configuration

The menu options in the IPMI CONFIGURATION submenu and their descriptions are shown in Table 6-12. These options are only available with the SBI-7226T-T2 blade module.

	Table 6-12. IPMI Configuration Submenu
Menu Option	Description
IPMI Information	This static display provides information for the Status of BMC and IPMI Firmware
Display (Static)	Revision.
 View BMC System	This sub-menu allows you to view all events in the BMC Event Log. It will take a
Event Log	maximum of 15 seconds to read all BMC SEL records.
SEL Entry	Use the +/- keys to traverse the BMC Event Log.
Number
Clear BMC System	Use this option to clear all events in the BMC System Event Log.
Event Log
	This is the input for the SET LAN Configuration command. See IPMI 1.5
 Set LAN	Specification Table 19.1 for details.
Configuration	NOTE: Each question in this sub-menu may take a considerable amount of time
	to complete.
 IP Address	Use this sub-menu for IP Address configuration.

6-10