Raypak B6000 manual Diagnostics, LED Indicators

Page 16

11.5.0Diagnostics

Several hardware diagnostics capabilities have been implemented using the LED indicator lights on the front of the T-3 card. The possible conditions as indicated by the lights are:

11.5.1LED Indicators

Several hardware diagnostics capabilities have been implemented using the LED indicator lights on the front of the module. The possible conditions as indicated by the lights are:

 

 

 

 

 

 

 

 

Name

LED

Color

Status

Indication

 

 

Modbus (P1)

D1

Green

Blinking

The T-3 is receiving a command

 

 

ACTIVE

 

 

 

from the Modbus Host

 

 

 

 

 

Steady

The T-3 is not detecting a valid

 

 

 

 

 

ON

command. If the master is

 

 

 

 

 

or

transmitting, be sure all dip

 

 

 

 

 

OFF

switches are set correctly and that

 

 

 

 

 

 

the cable connection is correct.

 

 

Raypak (P2)

D2

Green

Blinking

The T-3is processing a B6000

 

 

ACTIVE

 

 

 

command

 

 

 

 

 

Steady

Check cable connection to verify

 

 

 

 

 

ON

polarity of terminations between

 

 

 

 

 

or

T-3 card and B6000 (See Appen-

 

 

 

 

 

OFF

dix B)

 

 

Modbus (P1)

D3

Red

ON

The Modbus port has detected a

 

 

COMM

 

 

or

communications error condition.

 

 

ERR

 

 

Blinking

See Section 4.2

 

 

 

 

 

 

 

 

 

 

 

 

OFF

No error conditions at this time.

 

 

Raypak (P2)

D4

Red

ON

The T-3 card has detected a

 

 

FAULT

 

 

 

communications error condition.

 

 

 

 

 

OFF

No error conditions at this time.

 

Should the configuration dip switches select an invalid address or an invalid baud rate, the LED indicators will alternate in the on/off fashion on 1/2 second intervals until correct values are selected.

16

Image 16
Contents Installation and Operating Manual Table of Contents Raypak B6000 System Protocol Interface Contents Quantity Installation and Mounting Wiring T-3 B6000 System Control Board Check Your Power Source Page 11.0.T-3 Product Specifications Command Error Checking Command TypesModbus Communications Data Integrity Modbus Register MapDip Switch Configuration SW1 Modbus Port ConfigurationIndicates Factory Setting 11.3.1.3 T-3 Jumper Configurations 11.3.2 B6000 CommunicationsModbus Commands Function Address Slave Driver Code Command Range CommentsModbus Error Codes Modbus Protocol SupportDiagnostics LED IndicatorsService and Repair ProSoft Support, Service and WarrantyTechnical Support Limited Warranty Appendix a Modbus Register MapBit Function Function Function Type DescriptionBoiler #1 Boiler #2 Boiler #3Boiler #4 Boiler #5Boiler #7 Boiler #6Boiler #8 40070 TS Boiler Start Times Sec Boiler #1
Related manuals
Manual 51 pages 14.6 Kb

B6000 specifications

The Raypak B6000 is a high-efficiency boiler designed for residential and commercial heating applications. Known for its reliability and advanced features, the B6000 exemplifies Raypak's commitment to engineering excellence and innovative technology.

One of the standout attributes of the Raypak B6000 is its robust construction. The boiler is built with high-quality materials, ensuring durability and longevity in a variety of environments. It features a compact design, which allows for easy installation even in spaces with limited room. Moreover, it has a user-friendly interface that facilitates straightforward operation and maintenance, making it accessible for both homeowners and HVAC professionals.

The B6000 is equipped with advanced heating technologies that enhance its performance and efficiency. It utilizes a modulating burner system that adjusts the heat output based on the demand, ensuring optimal energy usage. This not only leads to lower energy bills but also contributes to a reduced carbon footprint, making the B6000 an environmentally friendly choice.

Another key feature of the Raypak B6000 is its stainless steel heat exchanger, which provides superior heat transfer and contributes to the boiler's overall efficiency. The heat exchanger is designed to withstand high temperatures and pressures, ensuring safety and reliability throughout its operation. Additionally, the B6000 offers multiple venting options, including direct venting and horizontal venting, providing flexibility in installation.

The B6000 also comes with integrated controls that allow users to easily monitor and adjust settings. These controls can enhance energy efficiency by accommodating varying heating needs throughout the day. Furthermore, the boiler is compatible with smart home systems, enabling remote operation and monitoring.

In terms of safety features, the Raypak B6000 is equipped with multiple safety sensors and shutoff systems to ensure safe operation. This includes automatic shutdown in case of malfunction, preventing potential hazards.

Overall, the Raypak B6000 is a top-tier boiler that combines efficiency, reliability, and advanced technology, making it a preferred choice for those seeking a dependable heating solution. It is suitable for various applications, from residential heating to larger commercial projects, further establishing its versatility in the market. Whether for new installations or replacements, the B6000 stands out as a reliable option for efficient heating solutions.