SMC Networks SMC-EZ1024DT manual Rear Panel

ABOUT THE EZ SWITCH 10/100

Port and System Status LEDs

LED	Condition	Status
Gigabit Port
LINK/	Off	The port has not established any network
ACT		connection.
	On	The port has established a valid network
		connection.
	Flashing	The port has established a valid network
		connection and traffic is passing through the
		port.
10/100M	On	The port has established a valid network
		connection and communications have been
		set to 100 Mbps.
1000M	On	The port has established a valid network
		connection and communications have been
		set to 1000 Mbps.
FDX/	On	The port is in full-duplex mode.
COL
	Off	The port is in half-duplex mode.
	Flashing	Packet collision is occurring in half-duplex
		mode.

Rear Panel

The AC power receptacle is located on the rear panel of the switch.

100-240V~ 50-60Hz 0.3A

4