SMC Networks SMC-EZ1024DT manual Front Panel LEDs, Led

ABOUT THE EZ SWITCH 10/100

Front Panel LEDs

The front panel of the switch provides status LEDs for “at-a-glance” system monitoring. The following table details the functions of the various indicators:

Port and System Status LEDs

LED	Condition	Status
Power	On	The switch is receiving power.
Ports 1-8
LINK/	Off	The port has not established any network
ACT		connection.
	On	The port has established a valid network
		connection.
	Flashing	The port has established a valid network
		connection and traffic is passing through the
		port.
10/100M	Off	The port has established a valid network
		connection and communications have been
		set to 10 Mbps.
	On	The port has established a valid network
		connection and communications have been
		set to 100 Mbps.
FDX/	On	The port is in full-duplex mode.
COL
	Off	The port is in half-duplex mode.
	Flashing	Packet collision is occurring in half-duplex
		mode.

3