SMC Networks SMC7824M/VSW manual Installing GE-PON Connection

Page 29

IMN	Installation Manual
	TigerAccess™ EE

5.1.2Installing GE-PON Connection

i

The switch provides 1-slot for an uplink module which has 1-port of 1000Base-X and 1- port of GE-PON interface. Use the following procedure when installing the GE-PON con- nection on uplink modular unit.

1.Cut the cables to length.

2.Attach the SC connectors.

3.Label and mark the cables.

4.Route and stow the cable in the rack.

5.Install the cables according to your cabling plan.

6.Connect the cable to the GE-PON interface.

Be sure to check the connector type when cabling PON lines. SC/APC type (green) con- nector should be connected to OLT side, and SC/PC type (blue) connector should be connected to PON uplink port on the switch.

Fig.5.2 shows how to connect the cable to GE-PON interface.

Fig. 5.2 Connecting the GE-PON Interface

28	SMC7824M/VSW

Image 29

Contents Page Trademarks IMNWarranty and Product Registration Details Reason for UpdateIssue History Contents Illustrations Tables General Notes Protective MeasuresProtection against Escaping Laser Light Protection against Excessive High Contact VoltageHandling Modules General Protection against Fire in Racks or HousingsComponents Subject to Electrostatic Discharge FCC Registration Handling Optical Connectors and Fiber Optic LinesRack Mount Instructions Declaration of RoHS Conformity UL Safety ComplianceProduct View OverviewSystem Product SpecificationAdvanced VDSL2 Function FunctionalitiesLayer MulticastPhysical Specification Operating Status LEDs Power SupplyOperating Indicators Tab Status LEDs for Vdsl InterfacesStatus LEDs for Console Interface Status LEDs for Mgmt InterfaceStatus LEDs for GE-PON Uplink Interfaces Items SuppliedStatus LEDs for Uplink Interfaces Constructing the Rack Setting Up the RackRack Installation 19 Rack Sectional View Equipping the Rack Installing the SystemAttaching the Wall Mounting Brackets Mounting on a WallSwitch mounted on a wall Grounding the System Grounding the SystemEquipping the System Installing Uplink ModuleCabling the System Installing Optical Connection Connecting Uplink InterfaceShows how to connect the cable to GE-PON interface Installing GE-PON ConnectionInstalling the Electrical Connection Installing Electrical ConnectionConnecting the System to the Main Distribution Frame Connecting Vdsl InterfacePin Signal Connecting Narrowband ServicesConnecting the Console Access Connecting Console AccessShows how to connect the outband Mgmt interface Connecting Mgmt InterfaceDescribes how to connect the AC power cable Connecting Power SupplyA1 Abbreviations AppendixBases A2 Ordering InformationCPE options Uplink Interface options Not supported at first releaseSMC7824M/VSW For Technical SUPPORT, Call