SMC Networks SMC7824M/VSW manual Connecting Vdsl Interface

IMN	Installation Manual
	TigerAccess™ EE

5.2Connecting VDSL Interface

The switch provides 24 VDSL ports as a subscriber interface. To enable broadband ser- vices to the subscriber, connect the copper cable to the Main Distribution Frame (MDF).

5.2.1Connecting the System to the Main Distribution Frame

Use this procedure when installing VDSL connections between the system and the MDF. Use the pre-assembled cables or adjust the cable lengths.

1.Cut the cables to length.

2.Attach the connectors to the cables.

3.Label and mark the cables.

4.Route and stow the cable in the rack.

5.Install the cables in accordance in accordance with your cabling plan.

6.Connect the cables depending on your application.

–If your application is to provide broadband services only, connect the cables to the VDSL interface on the front panel of the switch and the MDF.

–If your application is to provide broadband and narrowband services, connect the additional cables between the POTS interface and the PSTN switch.

Fig. 5.5 shows how to connect the cable to VDSL interface.

Fig. 5.5 Connecting the VDSL Interface

30 SMC7824M/VSW