SMC Networks SMC7824M/VSW manual Connecting Uplink Interface, Installing Optical Connection

Page 28

Installation Manual	IMN
TigerAccess™ EE

5.1Connecting Uplink Interface

5.1.1Installing Optical Connection

The switch provides uplink 1-slot which requires its own additional optical module. You can select the proper module in Tab. 6.3. In this section, the case of installing an optical connection with the LC type SFP module is described.

Use the following procedure when installing the optical connection with the LC type SFP module.

1.Cut the optical cables with LC connector to length.

2.Attach the LC connectors.

3.Label and mark the cables.

4.Route and stow the cable in the rack.

5.Insert the SFP module into the service slot for optical connection.

6.Install the cables in accordance with your cabling plan.

7.Connect the fiber optic cable to SFP module.

Fig. 5.1 shows how to install SFP module and fiber optic cable.

Fig. 5.1 Installing the Optical Connection with SFP Module

SMC7824M/VSW

27

Image 28

Contents Page IMN TrademarksWarranty and Product Registration Issue History Reason for UpdateDetails Contents Illustrations Tables Protective Measures General NotesProtection against Excessive High Contact Voltage Protection against Escaping Laser LightComponents Subject to Electrostatic Discharge Protection against Fire in Racks or HousingsHandling Modules General Rack Mount Instructions Handling Optical Connectors and Fiber Optic LinesFCC Registration UL Safety Compliance Declaration of RoHS ConformityOverview Product ViewProduct Specification SystemFunctionalities Advanced VDSL2 FunctionLayer MulticastPhysical Specification Operating Indicators Power SupplyOperating Status LEDs Status LEDs for Vdsl Interfaces TabStatus LEDs for Console Interface Status LEDs for Mgmt InterfaceStatus LEDs for Uplink Interfaces Items SuppliedStatus LEDs for GE-PON Uplink Interfaces Rack Installation Setting Up the RackConstructing the Rack 19 Rack Sectional View Installing the System Equipping the RackMounting on a Wall Attaching the Wall Mounting BracketsSwitch mounted on a wall Grounding the System Grounding the SystemInstalling Uplink Module Equipping the SystemCabling the System Connecting Uplink Interface Installing Optical ConnectionInstalling GE-PON Connection Shows how to connect the cable to GE-PON interfaceInstalling Electrical Connection Installing the Electrical ConnectionConnecting Vdsl Interface Connecting the System to the Main Distribution FrameConnecting Narrowband Services Pin SignalConnecting Console Access Connecting the Console AccessConnecting Mgmt Interface Shows how to connect the outband Mgmt interfaceConnecting Power Supply Describes how to connect the AC power cableAppendix A1 AbbreviationsA2 Ordering Information BasesCPE options Uplink Interface options Not supported at first releaseSMC7824M/VSW For Technical SUPPORT, Call