SMC Networks SMC7824M/VSW Installing Electrical Connection, Installing the Electrical Connection

Page 30

Installation Manual	IMN
TigerAccess™ EE

5.1.3Installing Electrical Connection

According to the network or installation environment, you can use 10/100/1000Base-T in- terface instead of the optical connection. The switch automatically recognizes MDI/MDIX connectors defined in IEEE 802.3.

Fig. 5.3 RJ45 Connector

Use the following procedure when installing an electrical connection.

1.Cut the cables to length.

2.Label and mark the cables.

3.Route and stow the cable in the rack.

4.Install the cables in accordance with your cabling plan.

5.Connect the cable to a suitable electrical port.

Fig. 5.4 describes how to connect the cable to 10/100/1000Base-T interface.

Fig. 5.4 Installing the Electrical Connection

SMC7824M/VSW

29

Image 30

Contents Page IMN TrademarksWarranty and Product Registration Reason for Update Issue HistoryDetails Contents Illustrations Tables Protective Measures General NotesProtection against Excessive High Contact Voltage Protection against Escaping Laser LightProtection against Fire in Racks or Housings Components Subject to Electrostatic DischargeHandling Modules General Handling Optical Connectors and Fiber Optic Lines Rack Mount InstructionsFCC Registration UL Safety Compliance Declaration of RoHS ConformityOverview Product ViewProduct Specification SystemLayer FunctionalitiesAdvanced VDSL2 Function MulticastPhysical Specification Power Supply Operating IndicatorsOperating Status LEDs Status LEDs for Console Interface Status LEDs for Vdsl InterfacesTab Status LEDs for Mgmt InterfaceItems Supplied Status LEDs for Uplink InterfacesStatus LEDs for GE-PON Uplink Interfaces Setting Up the Rack Rack InstallationConstructing the Rack 19 Rack Sectional View Installing the System Equipping the RackMounting on a Wall Attaching the Wall Mounting BracketsSwitch mounted on a wall Grounding the System Grounding the SystemInstalling Uplink Module Equipping the SystemCabling the System Connecting Uplink Interface Installing Optical ConnectionInstalling GE-PON Connection Shows how to connect the cable to GE-PON interfaceInstalling Electrical Connection Installing the Electrical ConnectionConnecting Vdsl Interface Connecting the System to the Main Distribution FrameConnecting Narrowband Services Pin SignalConnecting Console Access Connecting the Console AccessConnecting Mgmt Interface Shows how to connect the outband Mgmt interfaceConnecting Power Supply Describes how to connect the AC power cableAppendix A1 AbbreviationsCPE options A2 Ordering InformationBases Uplink Interface options Not supported at first releaseSMC7824M/VSW For Technical SUPPORT, Call