

Test
tone
Use the test tone check the speaker connection status or level.
To automatically output test tone
√
1 Press SETUP/MENU button, and then press ENTER button.
•“SETUP MODE” appears on the display and the unit goes into Setup Mode.
2Press button to select the
and then press ENTER button.
• Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .
• During test signal output, press …† button to adjust the individual speaker output level from
To stop test tone
•Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
Using the Test Tone button
Press TEST TONE button.
•Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W.
•During test tone output, press …† button to adjust the speaker output level from
GB
To Manually Output Test Tone
√
1Press SETUP/MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2Press ➛❿ button to select the
3 Press ➛❿ button to select the speaker you want..
• Each time you press ➛❿button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL | OPERATION | |
➝ S.L ➝ S.W will be selected in turn. | ||
|
4 Press …† button to set the test tone as you want.
• You can adjust the speaker output level from
• The sound gets quieter at
To stop test tone
•Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
Test Tone Output
•F.L (front left) :
•CEN (centre) :
•F.R (front right) :
•S.R (surround right) :
•SBR (surround back right) :
•SBL (surround back left) :
•S.L (surround left) :
•S.W (subwoofer) :
26 | 27 |