Setting the speaker mode
Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.
√ 
REMOTE CONTROL
1 Press SETUP/MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press 
button to select the “SPK SETUP”, and then press ENTER button.
3Press 
button to select the speaker you want.
• Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝ SUB ➝ CROVR will be selected in turn.
4 Press …† button to set the mode (LARGE, SMALL etc.) for the selected speaker.
5 Repeat steps
To exit setup mode
•Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Using the SPK SELECT button
1 Press SPK SELECT button to select the speaker you want.
• Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝ SUB ➝ CROVR will be selected in turn.
2 Press …† button to set the mode (LARGE, SMALL etc.) for the selected speaker.
3 Repeat steps
To turn the SUBWOOFER on or off.
Press SUBWOOFER button on the remote.
•Each time you press this button, SUB : YES, SUB : NO will be selected in turn.
• If FRONT is set to LARGE, you can select YES or NO for SUB.
• If FRONT is set to SMALL, SUB is automatically set to YES. NO cannot be selected.
GB
MAIN UNIT
1Press SETUP button, and then press ENTER (
) button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press | button to select the “SPK SETUP”, and then | OPERATION | |
press ENTER ( ) button. | |||
| |||
3 Press | button to select the speaker you want. |
| |
• Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝ |
| ||
SUB ➝ CROVR will be selected in turn. |
| ||
4Press …† button to set the mode (LARGE, SMALL etc.) for the selected speaker.
5Repeat steps
To exit setup mode
•Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and Setup Mode is exited.
SettingtheSpeaker
SPEAKER | Possible Settings | Default Setting | • LARGE : Select when using large speakers. You can listen to full | |
FRONT(Front) | LARGE,SMALL | SMALL | range sound. | |
|
|
| • SMALL : Select this when using small speakers | |
CEN(Centre) | LARGE,SMALL,NONE | SMALL | ||
SURR(Surround) | LARGE,SMALL,NONE | SMALL | • NONE : Select when no speaker is used | |
• YES (subwoofer) : Select when using the subwoofer speaker. | ||||
|
|
| ||
S.BACK(SurroundBack) | LARGE,SMALL,NONE | SMALL | ||
• NO (subwoofer) : Select when not using the subwoofer speaker. | ||||
|
|
| ||
SUB(Subwoofer) | YES,NO | YES | ||
• CROVR : Select the crossover frequency for the best bass response | ||||
CROVR | 60,80,100,120, |
| ||
150Hz | in your room. | |||
(Crossover Frequency) | 150,180,200(Hz) | |||
|
| |||
|
|
|
|
20 | 21 |