Samsung Complete Guide to Connecting the AV R720 Home Theater System

Page 6

Connecting the speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

GB

ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER)

PS-AW720S

 

 

 

 

SURROUND

SURROUND

FRONT(R)

FRONT (L)

SURROUND(R)

SURROUND(L)

BACK(R)

BACK(R)

PS-AF720S

PS-AF720S

PS-AR720S

PS-AR720S

PS-AB720S

PS-AB720S

SL

SBL

Position of AV Receiver

• Place AV Receiver on a dedicated stand or rack.

Front Speakers

Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

Place the speakers so that their tweeters will be at the same height as your ears.

Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speaker.

Center speaker

It is best to install it at the same height as the front speakers.

You can also install it directly over or under the TV.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

SR

SBR

Surround Speakers

Place these speakers behind your listening position.

If there isn't enough room, place these speakers so they face each other.

Place them about 60 to 90cm (2 to 3feet) above your ears, facing slightly downward.

Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.

Surround Back Speakers SBL SBR

If you are using two rear center speakers, place them facing forward from behind the listening position.

Place the surround back speaker about 70 cm to 1 m (2.3~3.3feet) above surround speakers, facing slightly downwards.

• When you attach the speakers to a wall, make sure to

fasten them tightly so they do not fall off.

 

 

MAIN UNIT

CONNECTIONS

 

 

 

 

 

AV-R720

 

 

SYSTEM MODEL NAME : HT-AS720S

 

 

MAIN UNIT

AV-R720

 

 

FRONT SPEAKER

PS-AF720S

 

 

CENTER SPEAKER

PS-AC720S

 

CENTER

SURROUND SPEAKER

PS-AR720S

 

SURROUND BACK SPEAKER

PS-AB720S

 

PS-AC720S

 

 

ACTIVE SUBWOOFER

PS-AW720S

 

CONNECTING SPEAKER WIRE

1. Loosen the knob by turning counterclockwise.

2. Insert the bare part of the wire into the hole in the side of each terminal.

3. Tighten the knob by turning clockwise to secure the wire.

Connecting the Speakers

1. Press down the terminal tab on the back of the speaker.

1

2

Subwoofer function

Active subwoofer with integrated 150W amplifier provides rich bass sound.

1Connect the SW OUT terminal of the amplifier (AV-R720) to the INPUT terminal of the subwoofer speaker.

2Press the POWER button on the rear side of the subwoofer to turn the power on.

3Using the subwoofer’s VOLUME control, you can set the desired bass level (See page 28 "Setting Speaker Level" to set the subwoofer level in the menu).

2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab.

3. Connect the connecting plugs to the back of the AV receiver.

• Make sure the colors of the speaker terminals match the colors of the connecting plugs.

Keep the subwoofer speaker out of reach of children to Caution prevent them from inserting their hands or objects

into the duct (hole).

Black

Red

Never touch speaker terminals while the power is on. Doing so could result in electric shock.

Make sure the polarities (+ and -) are correct.

This system is capable of reproducing 6.1/7.1 channel sound, however only 5.1 speakers are supplied.

10

11

Image 6
Contents AV-R720 HT-AS720 Safety Warnings PrecautionsFeatures Contents√√ Accessories œœ DescriptionRange of operation of the remote control Description ContdConnecting the speakers √ Connecting the SpeakersSubwoofer function Connecting external devices Connecting video devicesCont’d TV with an Hdmi jack Video/AudioAnynet+ Connecting the FM antennaTo exit setup mode Set the Anynet+HDMI-CEC function to On on your TVFor DVD/SAT function Before using the AV receiverMethod For CD functionSetting the speaker mode Using the SPK Select buttonTo turn the Subwoofer on or off Press …† button to set the speaker distance Setting digital inputSetting Speaker Distance Press …† button to set the digital inputPress …† button to set the Hdmi audio Setting Hdmi AudioUsing the DRC button Press …† button to set the DRCPress Test Tone button Using the Test Tone buttonTest tone To stop test toneSetting speaker level Dolby Pro Logic llx modeUsing the SPK Level button Using the Effect button Setting Dolby Pro Logic llx effectSetting NEO6 mode Press NEO6 Mode buttonSetting EX/ES mode Setting Tone ControlUsing the EX/ES button SFE mode Stereo mode Surround Mode and Input Signal ChartTo Listen to Preset Station Listening to radioTo Listen to mono/stereo PTY Search is only applicable to preset stations Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? About RDS broadcastingConvenient functions To check sleep timerTo cancel sleep timer To output sound againPower button of the remote control, Setting is completed Pressthe TV.POWER button to turn onPoint the remote control toward the TV Convenient functions cont’dController, the setting is completed TV Brand Code ListPress DVD button to set the remote to DVD mode Remote control toward the DVDBefore calling for service VCR Brand Code ListBefore calling for service cont’d Product protection function