Using with other equipment | 10 |
ItemDescription
Always Output Outputs composite video and audio signals no matter
which input source is selected.
INPUT 1 Prohibit Does not output composite video and audio signals when INPUT 1 is selected.
INPUT 2 Prohibit Does not output composite video and audio signals when INPUT 2 is selected.
INPUT 3 Prohibit Does not output composite video and audio signals when INPUT 3 is selected.
INPUT 4 Prohibit Does not output composite video and audio signals when INPUT 4 is selected.
INPUT 5 Prohibit Does not output composite video and audio signals when INPUT 5 is selected.
5 Press HOME MENU to exit the menu.
Note
•The INPUT 4 video signal is not output from the MONITOR OUT jack regardless of this setting.
Using the HDMI Inputs
The INPUT 3 and INPUT 4 terminals include HDMI terminals to which digital video and audio signals can be input. To use the HDMI terminals, activate the terminal and specify the types of video and audio signals to be received from the connected equipment. For the types of these signals, see the operation manual that came with the connected equipment.
Before starting the menu, press INPUT 3 or INPUT 4 on the remote control unit or press INPUT on the plasma display to select INPUT 3 or INPUT 4.
Input signal correlation table
1920 x 1080i@50 Hz
720 x 576p@50 Hz
1280 x 720p@50 Hz
720(1440) x 576i@50 Hz
1920 x 1080i@59.94 Hz/60 Hz
720 x 480p@59.94 Hz/60 Hz
1280 x 720p@59.94 Hz/60 Hz
720(1440) x 480i@59.94 Hz/60 Hz
1920 x 1080p@24 Hz
For audio, the system supports the following:
•Linear PCM (STEREO 2ch)
•Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Note
•PC signals are not compatible with the HDMI terminal.
•It may take a short while until the image is displayed, depending on the equipment connected.
Connecting HDMI equipment
There are two HDMI inputs, labeled INPUT 3 and INPUT 4.
For INPUT 3, connect an HDMI cable for the video and (if necessary) a stereo audio cable for analog audio. You can select the audio and video format according to the device you’ve connected – see below for more.
3 | 4 | ||
|
|
|
|
Stereo audio | HDMI cable carrying |
cable | the HDMI mark |
HDMI device
For INPUT 4, connect just an HDMI cable – this carries both the audio and video signals.
3 | 4 | ||
|
|
|
|
HDMI cable carrying the HDMI mark
HDMI device
English
43
En
