Preparation
Chapter 5
Preparation
Installing the plasma display
Caution
Operating Environment
Operating environment temperature and humidity: +0 ºC to +40 ºC ; less than 85 % RH (cooling vents not blocked). Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).
05
English
| Over 50 cm | Moving the plasma display |
| (For |
Over 10 cm
Location
•Avoid direct sunlight. Maintain adequate ventilation.
•Because the plasma display is heavy, be sure to have someone help you when moving it.
Caution
•If you do not leave sufficient space above the plasma display, it will not receive enough ventilation and will not operate properly.
Note
•Allow enough space around the upper and back parts when installing to ensure adequate ventilation of the rear of the unit.
Using the optional PIONEER stand
For details on installation, refer to the instruction manual supplied with the stand.
Using the optional PIONEER speakers(for PDP-507XG only)
For details on installation, refer to the instruction manual supplied with the speaker.
Note
•Do not use the speaker to support the weight of the plasma display.
•Always remove the speakers before moving the plasma display. Do not hold the plasma display by the speaker mounting fittings.
15
En
