06Watching TV
Changing channels
Use the remote control or the control panel on the
Channel display
8
AAA
STEREO
STANDARD
FULL
Using P+ / P– on the remote control unit
•Press P+ to increase the channel number.
•Press P– to decrease the channel number. When viewing Teletext information:
•Press P+ to increase the page number.
•Press P– to decrease the page number.
See also Using the Teletext Functions on page 46.
Note
•Press CH RETURN to switch back to the previous channel. Press again to retunr to the current channel.
•The CHANNEL +/– buttons on the plasma display work in the same way as P+ /
•P+ / P– cannot pick up channels that are set to skip. For Channel Skip, see steps 13 and 14 under Setting up TV channels manually on page 25.
Using 0 to 9 on the remote control unit
• Select channels directly by pressing buttons 0 to 9.
For example:
To select channel 2
To select channel 12
To select channel 123
When viewing Teletext information:
20
•View a page directly which is
Note
•Press CH RETURN to switch back to the previous channel. Press again to retunr to the current channel.
•After entering a channel number you can press CH ENTER to tune in the channel more quickly.
•In standby, when you press 0, the power turns on and images come from the INPUT 1 source. Or, when you press any button from 1 to 9, TV images display.
Changing the volume and sound
Use the remote control or the control panel on the
Using i + /i – on the remote control unit
•To increase the volume, press i +.
•To decrease the volume, press i
Volume adjustment
•VOLUME +/– on the plasma display operates the same as i + /i
Using e on the remote control unit
•Press e to mute the sound. e appears on the screen.
Muting
•Press e again or i + to restore the sound.
En