Pioneer PDP-507XG, PDP-427XG manual Focus, Front Surround, Setting up, English

Setting up 08

FOCUS

This shifts the apparent direction of the sound upward for more clearly defined sound.

1	Press HOME MENU.
2	Select “Sound“ (			then ENTER).
3	Select “FOCUS“ (			).
4	Select the desired parameter (					).
			Sound STANDARD
		Treble		2
		Bass		0
		Balance		0
		Reset
		FOCUS				Off
		Front Surround				Off
		Headphone Output			Main
		Sub Volume		15
FOCUS
Selections Off				Deactivates FOCUS.
			On	Activates FOCUS.

5 Press HOME MENU to exit the menu.

Note

•You cannot set up the sound field for listening with headphones.

•If you set up the sound field with headphones connected, the new setting will become effective as soon as you disconnect the headphones.

•The effect of this function differs depending on signals.

Front Surround

This provides three-dimensional sound effects and/or deep, rich bass.

1	Press HOME MENU.
2	Select “Sound“ (		then ENTER).
3	Select “Front Surround“ (			).
4	Select the desired parameter (				).
Front Surround
Selections Off			Deactivates both SRS and TruBass
		SRS	Reproduces highly effective three-dimensional
			sound.
		TruBass	Provides deep, rich bass using a new
		(default)	technology.
		TruBass + SRS	Provides both TruBass and SRS effects.
5	Press HOME MENU to exit the menu.

Note
• You cannot adjust the front surround effect for listening with	English
connected, the new setting will become effective as soon as
headphones.
• If you change the front surround effect with headphones
you disconnect the headphones.

• You can also press (FRONT SURROUND) on the remote to change the selection.

• (WOW) designates a status where the FOCUS is on and TruBass + SRS has been selected for Front Surround.

• is a trademark of SRS Labs, Inc.

•WOW technology is incorporated under license from SRS Labs, Inc.

•The effect of this function differs depending on signals.

Listening to audio from the sub screen using headphones

With headphones connected, you can listen to audio coming from the sub screen when in the 2-Screen or Picture in Picture mode; audio coming from the main screen is output from the speakers.

1	Press HOME MENU.
2	Select “Sound“ (		then ENTER).
3	Select “Headphone Output” (			).
4	Select the desired parameter (			).
		FOCUS				Off
		Front Surround				Off
		Headphone Output			Main
		Sub Volume		15

Headphone Ouput

Selections	Main	Audio coming from the main screen is
		output from the PHONES output terminal.
	Sub	When in the 2-screen or picture-in-picture
		mode, audio coming from the sub screen is
		output from the PHONES output terminal.

5	Select “Sub Volume” (	).
6	Select the desired volume level (		).
	Front Surround		Off
	Headphone Output		Sub
	Sub Volume	15

7 Press HOME MENU to exit the menu.

Note

•To adjust the volume for headphones after selecting “Sub”, always use “Sub Volume” from the menu, whether the screen is in single, 2-picture or picture-in-picture mode. When the screen is in single mode with “Sub” selected, audio coming from the screen is output from the speakers even with headphones connected.

33

En