10Using with other equipment
Connecting a personal computer
Use the PC terminals to connect a personal computer.
• The PC input terminal is
3 | 4 |
RGB cable
Stereo
mini jack cable
PC
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC on the remote control unit or use the INPUT button on the plasma display to select PC.
When connecting to a personal computer, the correct input signal type is automatically detected. If the personal computer image does not come in clearly, you may need to use Auto Setup menu. See page 35.
Note
• The PC terminals cannot be used for audiovisual equipment.
Resolution | Frequency |
720 x 400 | 70 Hz |
|
|
640 x 480 | 60 Hz |
|
|
| 72 Hz |
|
|
| 75 Hz |
|
|
800 x 600 | 56 Hz |
|
|
| 60 Hz |
|
|
| 72 Hz |
|
|
| 75 Hz |
|
|
1024 x 768 | 60 Hz |
|
|
| 70 Hz |
|
|
| 75 Hz |
|
|
1360 x 768 | 60 Hz |
|
|
42
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting an amplifier /AV receiver and subwoofer to the plasma display.
Audio cable
Stereo audio cable
Amplifier/Subwoofer
AV receiver
Note
•For details, refer to the operation manual for the audio equipment to be connected.
•If your amplifier/AV receiver has a subwoofer output, it is not necessary to connect the subwoofer output on the plasma display.
•Audio signals corresponding to the currently displayed images are always output to the MONITOR OUT and SUBWOOFER terminals.
•Audio from a connected subwoofer is muted when you have selected "Sub" for "Headphone Output" (page 33) and connected headphones.
Avoiding unwanted feedback
You can prevent unwanted feedback from adversely affecting the quality of images. Specify the output terminal whose output is to be inhibited.
1 | Press HOME MENU. |
|
|
|
2 | Select “Option“ ( | then ENTER). |
| |
3 | Select “Monitor Out“ ( | then ENTER). | ||
4 | Select the desired parameter ( | then ENTER). | ||
Monitor Out
Always Output
INPUT1 Prohibit
INPUT2 Prohibit
INPUT3 Prohibit
INPUT4 Prohibit
INPUT5 Prohibit
En
