11Using Teletext
Chapter 11
Using Teletext
Using the Teletext Functions |
| Operating the Teletext basics |
What is Teletext?
Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your plasma display receives Teletext signals broadcast by TV networks, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and program previews are among many services available.
Important
•Displaying Teletext pages for a long period of time, or for shorter periods of time everyday, may result in image retention.
Turning on and off Teletext
1Select a TV channel or external input source providing a Teletext program.
2Press m to display the Teletext (full screen).
3Press m again to display the Teletext on the right screen and normal image on the left screen.
•Each time you press m, the screen switches as shown to the left.
•If you select a program with no Teletext signal, "Cannot display Teletext." appears.
TELETEXT
TELETEXT
46
Selecting and operating Teletext pages
Use the following remote control buttons to select and operate Teletext pages.
Color (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in the colored brackets at the bottom of the screen by pressing the corresponding color (RED/GREEN/YELLOW/BLUE) on the remote control unit.
0to 9:
Directly select any page from 100 to 899 by using 0 to 9.
w/ x:
Selects the next or previous page.
v:
Each time you press v, the teletext image switches as shown below.
Full 
Upper half
Lower half
k:
To display hidden information such as an answer to a quiz, press k.
Press k again to hide the information.
:
To stop updating Teletext pages, press 
.
Press 
again to release the hold mode.
l:
Displays an Index page for the CEEFAX/FLOF format. Displays a TOP Over View page for the TOP format.
Note
•Before displaying the Teletext, return the screen to the single- screen mode.
En
