Pioneer PDP-427XG manual Sound adjustments, Using the 3DYC and I-P Mode, Select the desired level

08Setting up

Using the 3DYC and I-P Mode

1	Press HOME MENU.
2	Select “Picture“ (	then ENTER).
3	Select “Pro Adjust“ (	then ENTER).
4	Select “Others“ (	then ENTER).
5	Select an item to be adjusted (		then ENTER).
	• You can select "3DYC" or "I-P Mode".
6	Select the desired parameter (		then ENTER).

3DYC

Optimizes characteristics for separating brightness signals and color signals. This works for both video and still images.

Selections	Off	Deactivates 3DYC.
	High	Enhanced 3DYC
	Mid	Standard 3DYC
	Low	Moderate 3DYC

I-P Mode

Perform optimum conversion from interlace signals to progressive signals. This works for both video and still images.

Selections	1	Optimum for video images
	2	Standard setting
	3	Optimum for still images

Sound adjustments

You can adjust the sound quality to your preference with the following settings.

Adjust the sound to your preference for the chosen AV Selection option (see AV Selection on page 28).

1	Press HOME MENU.
2	Select “Sound“ (		then ENTER).
3	Select an item to be adjusted (				).
4	Select the desired level (			).
		Sound STANDARD
		Treble			2
		Bass			0
		Balance			0
		Reset
		FOCUS					Off
		Front Surround					Off
		Headphone Output				Main
		Sub Volume			15

Item	button	button
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Shifts the audio balance to	Shifts the audio balance to
	the left	the right

7 Press HOME MENU to exit the menu.

Note

•The 3DYC setting is ineffective when SECAM, PAL-M, PAL-N or 4.43 NTSC signals are input.

•For the I-P Mode, the individual parameters are not selectable for the following input signals: 480p, 720p@60 Hz, 576p, 720p@50 Hz, 1080p@24 Hz.

•For the 3DYC, the individual parameters are selectable only when you have selected the analog tuner, or you have selected input 1, 2, 3 or 5 as the input source and there is a video signal present.

5 Press HOME MENU to exit the menu.

Note

•You cannot adjust the sound quality for listening with headphones.

•If you perform sound adjustments with headphones connected, the new settings will become effective as soon as you disconnect the headphones.

• To restore the factory defaults for all items, press to select "Reset" in step 3, and then press ENTER. A confirmation

screen appears. Press	to select "Yes", and then press
ENTER.

32

En