Other Functions
Attenuating volume
The attenuator lets you lower the volume level
quickly (by about 90%).
• Press ATT to turn the attenuator on.
“ATT” appears in the display.
• Press ATT again to turn the attenuator off
and return to the original volume level.
Displaying and setting the clock
You can turn the time display on or off and set
the time.

Setting the time display on or off

1. Press NEXT to display “CLK”.
Press NEXT until “CLK” appears.
2. Press CLK and then press ON/OFF to
turn the time display on.
The light illuminates. When the time display
is turned on, “TIME”, “DATE” and “JUST”
appear simultaneously.
• Press ON/OFF again to turn the time dis-
play off.
• If you press BAND and exit the calendar
and time mode, the time display will
appear instead of the source name.
Note:
• If you do not operate the function within about 60
seconds, the display is automatically returned.

Off clock display

When the time display is turned on, the calen-
dar display appears with the time display when
sources and the feature demo are off.

Setting the date

The calender display adjusted in this mode
appears only when sources and the feature
demo are off.
1. Press NEXT to display “CLK”.
Press NEXT until “CLK” appears.
2. Press CLK and then press DATE to set
the date.
3. Press 22or 33to switch between day,
month and year.
4. Press 55or ∞∞to correct the date.
Pressing 5advances the day, month or
year.
Pressing ∞turns back the day, month or
year.

Setting the time

1. Press NEXT to display “CLK”.
Press NEXT until “CLK” appears.
2. Press CLK and then press TIME to set the
time.
3. Press 22or 33to switch between hour and
minute.
4. Press 55or ∞∞to adjust the time.
Pressing 5advances the hour or minute.
Pressing ∞turns back the hour or minute.
Time display
44
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS